Please excuse the overly done steps for this extension of the build guide. This was assembled for the building impaired and not meant as an insult to the intelligence of my customers.
Full kit contents includes the pre-cut stock, short kit contents do not which requires the builder to cut the stock to size using the supplied foam cores to measure upon.
How to use wood glue: https://www.youtube.com/watch?v=iVjPuc83wzI
How to use hot glue: https://www.youtube.com/watch?v=3gNZY_FwU1k
“Only use this glue” Other glue may not work, it may even destroy your materials. “Sad, but yes, I had to share the links and this statement, those with experience use what glue works for you because you know well enough to test a small area if you are not sure….
Join the 1/4″ balsa stock and ply for the spars and use glue to secure them.
Make two of them.
Glue the foam core wing sections together.
Install and glue the spars you just assembled.
Add aileron seat stock, glue in place.
Add wing caps, glue in place.
Add servo plates, align and position before cutting pocket for the servo before gluing and mounting the plate. Cut away any covering before gluing for best results on the bond.
Add wing sheeting, glue in place after checking for the holes to line up to mount it to the fuselage of plane.
Add washers.
Install ailerons.
